Decoration is generally divided into pre-, mid-term and finishing stages. The finishing stage generally includes the installation of sanitary ware, home appliances and flooring, completion acceptance, settlement of works, cleaning, etc. The installation of sanitary appliances is very important in the finishing of hard work. The amount of engineering is relatively large, so we must pay attention to it. This article will introduce you to the precautions for the installation of sanitary ware furniture.
Ware appliance installation notes:
Under normal circumstances, the installation of sanitary ware and home appliances is the responsibility of the manufacturer. In this installation process, the owner needs to do supervision work to prevent damage to the product or home decoration caused by improper installation.
1, installation schedule
The products that the general manufacturer is responsible for installing are all carried out after the completion of the basic decoration. After selecting the manufacturer, the installation time should be agreed in advance. Generally, different products are installed by different manufacturers, so the time required for installation and the space occupied are required. They are all different. They can be arranged in order according to the actual situation. If some of them do not affect each other, you can consider installing them at the same time. In general, install cabinets, floors and then install lamps and curtains.
2, to avoid destructive installation
When the product is installed, it is necessary to do the supervision work to avoid the destructive installation. Before the installation, the basic decoration of the nearby area should be protected. Some cardboard can be laid on the floor of the floor tile. Avoid scratching the wall surface and avoid cracks on the wall or floor due to improper operation during installation.
3, installation supervision details
a, cabinet installation details
When the cabinet materials come into play, it is necessary to do the protection work. Generally, the cabinets are assembled first and then the countertops and hardware are installed. When installing the cabinets, it is generally necessary to open the eyes on the wall. At this time, it is necessary to remind the installer to construct the water and electricity drawings. To avoid damage to the original water and electricity pipelines due to eye damage, the installation of countertops and hardware should be standardized.
b, floor covering details
When paving the floor, the most important thing is to do the basic layer treatment. It is necessary to ensure that the base layer is flat and the dry humidity is suitable. During the installation process, it is necessary to pay attention to whether the worker has malicious loss.
c, hardware installation details
Some hardware may need to be installed by the owner himself, such as towel racks and racks. If you are going to drill holes, you must operate against hydropower drawings to avoid damage to the grassroots.
d, pay attention to installation acceptance
After the product is installed, it should be checked and accepted. Check whether the installation is firm, whether the surface is scratched, whether the connector is tight, etc. It is necessary to see if there is any damage in the surrounding area. If there is any, it should be presented in person and with the manufacturer. Negotiated settlement.
Tpu Double Coating Fire Hose,Tpu Double Coating Fire Fighting Hose,Fire Fighting Hose,Tpu Lining Water Fire Hose
NANTONG SENTIAN FIRE-FIGHTING EQUIPMENT CO.,LTD. , http://www.firehosefactory.com