What are the differences and advantages of the door hinge base in cabinet hardware? Let Xiaoxiang Hardware analyze it for everyone.
The difference and advantages of the door hinge base of cabinet hardware accessories
Author: Elephant Hardware
1. Sliding-in base: The sliding-in base can be said to be the original door hinge base, which is generally used for ordinary door hinges without dampers, as well as glass door hinges and stainless steel door hinges.
The slide-in type is divided into two holes or four holes. Because it is simple and intuitive, it is easy to adapt to the vertical, inclined, horizontal and pre-installation with small installation space. After the base is fixed, the door hinge main arm and base with sliding-in base are installed. It is quickly slid into the installation and fixed by hand screws. It is easy to install and disassemble, and is widely used by domestic and foreign furniture factories for mass production.
2. Fixed base: It is used for hidden hydraulic door hinges (also called buffer door hinges and damper door hinges). It is fixed on the door hinge with pins when it leaves the factory. It cannot be disassembled and installed.
Installation requires a certain level of professional installation. However, the fixed base does not cause the risk of the loose door sliding out due to the excessive weight of the door panel and long-term use, which can increase the bearing capacity of the door and facilitate the adjustment of the door. It is also required by some cabinet manufacturers and office furniture manufacturers to meet the buffer function of the door hinge.
3. Card type and button type quick-loading base: The quick-loading base is also called the quick-disassembling base. The quick-disassembling function is to remove the door panel by pressing a button on the door hinge base, and the hinge and the base can be separated and opened during installation. It can be pre-installed and is more convenient to load and unload than sliding into the base. After the door hinge base is fixed and fixed, insert the door hinge arm into the base, then gently press it with your fingertips, and you can hear a “clickâ€, indicating that the door hinge arm is securely hooked to the door hinge base through five pivot points. on.
The base is equipped with hydraulic door hinges (also called buffer door hinges, damper door hinges), common door hinges, glass door hinges and stainless steel hinges.
Due to the simplicity of pre-installation and assembly and disassembly, it is favored by the combination furniture manufacturers. It is also possible to carry out the local production and the long-distance transportation after the disassembly of the furniture.
Ordinary consumers can also organize and clean the inside and outside of the cabinet at any time during daily use.
Fast loading not only has a card type, but also has a card type two-dimensional door hinge base. It means that a two-dimensional base adjustment function is added to the card base. This function is designed for non-professional use of screwdrivers. Feel free to adjust the up and down angle of the cabinet door.
Http://news.chinawj.com.cn Submission:
TR' Electrical Protective Series provide a durable coating which protects and prolongs the project life.
Electrical Protecive Coating,Conformal Coating,Protective Coatings,Pet Electric Protective Coating
Ding Wei Paint Technology. CO,ltd , http://www.toprankchemical.com