The ceiling of the mineral wool board is an integrated ceiling created by the use of mineral fiber cotton sheets. It has properties such as sound insulation, fire prevention, heat insulation, and decorative effects. Therefore, it has become a popular ceiling material in recent years. The next small series for everyone to introduce what is the construction process of mineral wool board and mineral wool board ceiling .
What is a mineral wool board
The mineral wool board mainly uses slag wool as the main raw material, plus an appropriate amount of additives, and is processed through ingredients, forming, drying, cutting and embossing processes. Irregular holes on the surface, the surface can also be painted a variety of color paste, and mineral wool acoustic board with sound absorption, non-combustible, heat insulation, decorative and other superior performance, widely used in various architectural ceilings.
Mineral wool board ceiling construction technology
1. Grassroots clean-up: The foundation should be smooth and free of impurities. It can be used for all installations that may affect the construction of suspended ceilings of mineral wool boards.
2. Elastic lines: According to the design of the ceiling of mineral wool panels, it can be used as a standard line for the installation of ceilings for mineral wool panels.
3. Install the suspender: According to the drawings, determine the position of the suspender. The suspender should be made of reinforced steel with a diameter of 8. The spacing of the suspended ceiling can be between 900-1200mm. When the upper end of the installation is to be welded with the embedded part, the lower end of the joint is welded. Connect with hangers. The length of the exposed end of the installed boom is not less than 3mm.
4, the installation of the main keel: You can use the c39 keel, spacing in the 910-1210mm, in the installation of keel, the keel to be attached to the main keel, in accordance with the requirements of the ceiling arch 1/200, but also at any time to check the keel Flatness, while the main keel in the corridor is arranged along the corridor in the short direction.
5, install sub-keel: sub-keel can use paint T-type keel, spacing and plate lateral specifications are the same, and then the sub-keel hung on the big keel, in parallel with the main keel installed 610mm horizontal keel, spacing 600 Or 1200mm.
6. Install the side keel: Using the L-shaped side keel, fix the wall with a plastic tube or screw. The fixed distance is 210mm. Before installing the side keel, use a putty to level it. This can prevent pollution when the wall is putty. And the situation is not easy to level.
7. Covert inspection: After hydropower installation, water testing and pressure suppression, the keel shall be subject to covert inspection. After the inspection is completed, the next process can be performed.
8. Installation of mineral wool board: The thickness and specification of mineral wool board can be designed according to specific requirements, generally 610*610*15. When installing mineral wool board, gloves must be worn to avoid causing pollution.
9. Construction acceptance: Check the documents and records when accepting the construction of the ceiling of the mineral wool board, including: construction drawings, design instructions and other design documents of the ceiling, product product qualification certificate, performance test report, entry acceptance record and retest Report; concealed project acceptance records and construction records.
Editor's summary: About what is the construction technology of mineral wool board and mineral wool board ceiling , I hope to help everyone. If you want to know more related information, you can pay attention to this website information.
Mineral wool board ceiling
Disposable Face Mask,Earloop Face Mask,Protective Face Mask,Kn95 Respirator Filter Mask
Chongqing Yilun Sanzi new packaging Co., Ltd , https://www.yilunmask.com