ZBL mining funnel feeding grouting pump can be used as a coal mining machine with a multi-purpose injection pump, grouting or other non-corrosive media can be used for pressure injection and coal mine drainage hole sealing grouting, but also For mine construction wells and underground water, pressure injection of high concentrations of cement slurry. The pump funnel underperformance of self-priming super injection concentration can be grouted or with a slurry, because of its cutting into the pulp and iron core rubber ball cutting. Grouting plunger body after a professional treatment with a certain degree of hardness and wear resistance, so that the overall life of the pump increased. Today's latest valid order information free to send! Morning latest buyers information free to send! Punch grab Rob here! Funnel grouting pump works: ZBL funnel grouting motor will power through the pulley, V-belt, gearbox, gear, helical gear shaft, connecting rod, roller, the rotary motion into a reciprocating linear motion, pull rod, column Plug for reciprocating motion, to complete suction and discharge action. Main technical parameters: Parameter name Unit Basic parameters Rated flow rate 50 (60) L / min Rated working pressure 4 Mpa Slurry tube 105 mm Stroke length 75 mm Reciprocating times 81 min-1 Supporting motor power 7.5 KW Supporting motor model YBK2-160M- 6 Weight 400 KG Dimensions (L × W × H) 2000 × 600 × 900 mm Drain mouth diameter 26 mmZBL funnel injection pump Selection Description: (1) Note that the selection of the solid particles contained in the grouting fluid may not be Greater than 3 ~ 4mm (2) Under the environmental conditions without explosion-proof on the ground, it can be equipped with anti-electromotor when grouting, which should be explained when ordering. (3) product supporting motor voltage 380 / 660v. For with 660 / 1140v timing, ordering must be described.
Wood Plastic Composite,Co-Extrusion WPC,Coextrusion Floor
WPC Decking Co., Ltd. , http://www.hswpcdecking.com