"TIMKEN imported bearings smooth protection" elements

Source: China Bearing Network Time: 2014-03-29

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1, smooth grease smooth TIMKEN imported bearings, the most smooth and smooth is in the program equipment stop time; and make up for the time; together; remove the old grease or squeeze out the old grease through the drain. In the participation in fresh grease The grease nipple should have been cleaned. If the bearing housing does not have a grease nipple, the bearing housing cover or end cover should be opened; in order to remove the old grease; after finishing; make up the same type of fresh grease.
2, smooth oil smooth timing to check the oil level and oil quality of the smooth oil; usually; the normal oil level should be the equipment oil level window or within the range of 1/3-2/3. The oil filling method is the oil cup; The oil level that appears is only representative of the oil replenishment; the oil level of the bearing housing is satisfactory for the operation; the oil level in the oil cup is less than 1/4 of its total volume.
View and replenish the oil method; take out a small amount of smooth oil as a sample and compare it with fresh smooth oil; the qualified unit can think about the oil quality test; to ensure the oil quality is qualified. If the sample looks like a cloud; then it can be with water The result of mixing; that is, the oil emulsification we often say; the smooth oil should be replaced at the moment.
If the color of the sample is darker or thicker, it can be shown that the smooth oil is now carbonized at the beginning; the old smooth oil should be completely replaced. If it is possible; use fresh smooth oil to wash the oil circuit. When replacing the smooth oil ; should ensure that the replacement of the smooth oil new and old type; and make up for the satisfactory demand of the oil level.
Use oil-type smooth system; if the oil temperature is below 60 Â° C (140 Â° F); and the smooth oil is not contaminated; then replace the smooth oil once a year. If the oil temperature is 60-100 Â° C (140- 210Â°F); replace the smooth oil four times a year. If the oil temperature is 100-120Â°C (210-250Â°F), replace the smooth oil once a month. If the oil temperature is 120Â°C (250Â°F) Above; then replace the smooth oil once a week.

Recommend to friends comments close window

Bearing related knowledge

Commonly used in the protection of stainless steel bearings, how to properly install and disassemble NSK bearings "with ball bearings outside the ball" classification ball bearing bearing selection summary

This article links to http://
Please indicate the bearing network http://

Previous: A good way to distinguish bearing quality Next: Correction of hydraulic excavator reverse bearing

Interlocking Flooring Clicks

Interlocking Flooring,Interlocking Flooring Clicks,Interlocking Spc Flooring Clicks,Vinyl Flooring Click

Jinan Caiming Wood Co.,LTD , https://www.caimingflooring.com