Detailed information on "rolling bearings"

Home>Bearing knowledge>Detailed information on "rolling bearings"
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Detailed information on "rolling bearings"

Source: Bearing network time: 2014-04-25

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The data analysis of the rolling bearing is as follows: the ferrule and the rolling body of the rolling bearing; one side repeatedly receives the high touch pressure; one side carries the tumbling touch with the sliding. The adherer; one side and the ferrule and the rolling body are both sides; or one of them slides Touch; one side receives tension and compression. Therefore; the ferrule of the bearing; the information, function, and primary requirements of the roll and the holder are as follows.
The functions required for the ferrule and roll body data: high rolling fatigue strength, high hardness and high wear resistance.
The functions required by the data are adhered to: the dimensional stability is good, the mechanical strength is large, and the processing is good. It is not the same according to the use; the impact resistance, heat resistance and corrosion resistance are also required.
Information on ferrules and tumbling bodies: ferrules and tumbling bodies are usually made of high-carbon chrome bearing steel. Most of the bearings; using JUJ steel in the JIS steel grade. The large-sized bearings use the chemical composition of SUJ3.SUJ2; in various countries around the world; as bearings The data has been normalized. For example, it is the same kind of steel as AISL52100 (USA), DIN100Cr6 (West Germany), BS535A99 (UK).
Further demand for impact resistance; use of chrome steel, chrome molybdenum steel, nickel chrome molybdenum steel as the bearing data, quenching by carburizing; make the steel from the appearance to the appropriate depth has a hardened layer. With appropriate hardening depth, fine Arrangement, suitable for the appearance of hardness and the hardness of the carburizing bearing; the bearing has better impact resistance than the bearing bearing steel; the chemical composition of the steel for ordinary carburizing bearings.
Vacuum degassing was implemented; therefore; the data used were high in cleanliness, low in oxygen content, and good in quality. The appropriate heat treatment was selected; the life of the rolling tumbling of the bearing was significantly improved.
In addition to the above steel grades; based on special use; also use high-speed steel with excellent heat resistance; stainless steel with good corrosion resistance.
Persistence of information: stamping and holding materials; using low-carbon steel. It is not the same as the use; also using brass plates, stainless steel plates. Cutting the data of the frame; using high-strength brass, carbon steel; Use synthetic resin.
Recommend to friends comments close window

Bearing related knowledge
Anatomy: technical standards for repairing centrifugal pump bearings
IKO imported bearings are faulty. The operating temperature affects the bearing life. The replacement of the bearing type at the end of the fan bearing


This article links to http://
Please indicate China Bearing Network http://

Previous:Features of joint bearing (3)
Next: Cooperation between bearings and shafts and housings

Multistep Cross Drill Bits

Tap Drill Bit,175Mm Cross Drilling Bits,Tungsten Carbide Cross Drill Bits,Multistep Cross Drill Bits

J.B Machinery (Ningbo) Co., Ltd. , https://www.jbdrill.com