The sofa is the main item in the ordinary home. I like the cotton fabric sofa, but the fabric sofa is not only easy to damage, but also difficult to care. What problems should you pay attention to during use and maintenance?
In the hot summer months, strong sunlight can easily lead to the fading of colored materials, so it will accelerate the aging of fabric furniture. When using and maintaining a fabric sofa, you may wish to note the following:
1. Keep the wall of the sofa at a distance of 0.51 cm from the wall.
2, avoid direct sunlight, it is best to place in the place to avoid the sun, or use a translucent tulle curtain to separate the daylight.
3. Dust at least once a week, paying particular attention to removing dust from the fabric structure.
4. The hair pad is turned over once a week to make the wear evenly distributed.
5, if stains, can be wiped with a clean rag and water, in order to avoid leaving a mark, it is best to wipe from the periphery of the stain. Velvet furniture should not be drowned, and dry cleaning agents should be used.
6. All cloth sleeves and bushings should be cleaned by dry cleaning, not washable, and not bleached.
7. If you find the loose thread, don't break it by hand. It is best to use a pair of scissors to cut the thread neatly.
Decontamination dry cleaning
3M foam cleaner, hair dryer with cold air, white rag.
Shake the detergent well and spray it directly onto the stained area. After 5 minutes, blow it off with the cold air of the hair dryer until the foam is completely absent.
1, avoid using hair dryer hot air
2, the cleaning agent should be appropriate, too much foam should not be clean.
3, the cleaning agent should not stay on the fabric for too long, so as not to corrode its true color.
Hot-Rolled Flat Steel is a general purpose cross-section rectangular steel bar. Its specifications are expressed in millimeters in width * width. Flat steel can be finished steel for components, ladders, bridges and fences. Flat steel can also be used to weld steel and blanks and stacking slabs. (Material: Q215, Q235), the implementation of standards: GB704-1988 instead of GB704-83, this standard applies to the thickness of 3 ~ 60mm, width of 10 ~ 200mm, rectangular cross-section of the general purpose of hot-rolled flat steel. Delivery status: flat steel to straight delivery. Metering method: length of length and length of the flat steel in accordance with the theoretical weight delivery
Mild Steel Flat Bar,Hot Rolled Flat Bar,Hot Rolled Steel Flat Bar,Hot-Rolled Flat Steel
TIANJIN ZHENXIANG STRIP PROCESSING CO., LTD. , http://www.zhenxiangsteel.com