Geothermal heating meets the characteristics of the human body's "foot warm head", and the geothermal heating eliminates the heating pipes and radiators in the room, which is more conducive to the layout and beauty of the living room, so this method is recognized and accepted by more and more people. How to choose geothermal floor? What are the properties of geothermal floor?
1, excellent thermal conductivity and heat dissipation
Wood and bamboo are good natural materials. The heat from the ground is transmitted to the surface through the floor. There is bound to be heat loss. The ideal floor can minimize these losses. Therefore, in order to reduce the loss of thermal energy and reduce the heating operation and maintenance expenses, the floor heating floor must be "selected thin and not thick". Choose from multi-layer solid wood, bamboo flooring and laminate flooring with a thickness of no more than 8 mm and a maximum of 10 mm.
2, material stability is better
The use environment of geothermal floor is complicated, especially in the northern part of the country. The ground in the non-heating season is subject to various moisture, and the floor temperature of the heating is suddenly increased. The floor must withstand the double changes of “temperature†and “humidityâ€. Therefore, the geothermal floor must be purchased with good material stability, such as laminate flooring, multi-layer solid wood flooring, and bamboo flooring.
3, moisture and heat resistance is strong
The integrated composite floor should use adhesive, and the adhesive should meet the three indicators of environmental protection, bonding strength, high temperature and high humidity aging. Especially for the geothermal floor, it is necessary to pass the experiments of high humidity resistance and low temperature resistance. If ordinary adhesives are used, the environmental protection index, moisture resistance, aging resistance and expansion ratio cannot meet the standard. Therefore, when consumers are shopping, it is very necessary to check the product report and inspection report of the merchant.
4, wear resistance should last
Since the geothermal floor should be thin and not thick, the composite surface layer is generally 0.3-0.6 mm. The wear resistance of the main surface layer is higher than the traditional index.
Polymeric Aluminium Chloride,PAC for Water Treatment,PAC for Water Treatment
Ferrous Sulfate Co., Ltd. , http://www.nssulphate.com