Shenzhen Lihao
Shenzhen professional feeder manufacturers are engaged in the production and sales of nc feeders all the year round. They have rich experience and relevant knowledge for nc feeders. No matter what kind of machinery we use, if we want to use them for a long time, we need us to It carries out certain maintenance work. When the nc feeder is not properly maintained during the operation, it will be very damaging. So, after all, how to maintain the nc feeder? Today, the small series of Shenzhen Lihao Machinery and everyone Share the maintenance nc feeder you don't know. The detailed explanation is as follows:
1. During the work process, it is necessary for the personnel who guard the nc feeder to have general technical knowledge and to understand the performance of the product. The nc feeder should normally be launched when there is no load, and then parked after the material is unloaded.
2. During the working process, the non-workers should be away from the machine and should not touch any rotating parts. If defects occur, the work should be stopped and the shortcomings should be eliminated.
3. When guarding the nc feeder, always check the operation of each component. If any loose parts are found, tighten them in time.
4. The screw tensioning equipment installed at the tail should be adjusted and fit, and the feeding belt has the normal working tension. The guards should always check the work of the conveyor belt. The damaged part should be replaced according to the degree of damage (whether it affects the production) and whether the resolution is replaced immediately or when it is to be repaired.
The above is all the contents of the small series of nc feeder manufacturers for everyone to share, I hope to help everyone.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
The rolled aluminium plate can be divided into twe types : Aluminium Hot Rolled Plate and aluminium cold rolled plate . Rolling is classified according to the temperature of the metal rolled. If the temperature of the metal is above its recrystallizationtemperature, then the process is known as hot rolling. If the temperature of the metal is below its recrystallization temperature, the process is known as cold rolling.
Different of cold rolled plate and hot rolled plate:
1. The accuracy of cold rolled plate is higher, the thickness of cold rolled plate is not more than xxxxxx mm.
2. The thinner, the thinner and the thin rolling 0.001mm steel strip; Hot rolling is now the thinnest to reach 0.78 mm.
3. The surface quality is superior, cold rolled steel plates can even produce mirror surface; On the surface of hot rolled plate, there are iron oxide and other defects.
4. Cold rolling can adjust its mechanical properties according to user requirements, such as tensile strength and process performance such as stamping performance. Cold rolling and hot rolling are two different kinds of rolling steels. As the name implies, cold rolling is made in steel at room temperature. Hot rolled steel is rolled in high temperature.
Hot rolled palte
Product Type
Typical Alloys
Typical Temper
Specification (mm)
Thickness
Width
length
Hot Rolled plate
3XXX & 5XXX
F/112
12-260
1000-3800
2000-38000
2XXX & 6XXX&7XXX
F/112
12-260
1000-3800
2000-38000
Annealed Plate
3XXX & 5XXX
O/H111
3.0-12
1000-2600
2000-24000
O
12-260
1000-3800
2000-38000
2XXX & 6XXX&7XXX
O
3.0-12
1000-2600
2000-24000
O
12-260
1000-3800
2000-38000
Quenched plate
2XXX & 6XXX&7XXX
T4/T6
4.0-12
1000-2600
2000-24000
12-260
1000-3800
2000-38000
Stretching Plate
2XXX & 6XXX&7XXX
T351/T451/T651
4.0-12
1000-2600
2000-24000
12-260
1000-3800
2000-38000
3003/5052/5083/5A06
2024/6061/7020/7075/7021
3003/5052/5754/5182/5083/5086/5A06
2024/6061/7020/7075
2024/6005A/6061/6082
/7020/7N01/7075/7050
2017/2024/6061/6082/7020
/7N01/7075/7050
T7X51
Cold rolled plate
Aluminium Rolled Plate,Hot Rolled Thick Plate,Aluminium Hot Rolled Plate,Aluminium Thick Plate
La Ya Aluminium products Co.,Ltd. , https://www.layametal.com