The main thing to pay attention to when purchasing a crane is that the special equipment for purchase, introduction, installation and technical transformation must comply with the relevant national standards for quality and technical supervision, safety and health regulations, especially for the selection and procurement of dangerous cranes. It is safe and recognized by the equipment department. The following is a small series to explain the purchase of single-beam suspension cranes and safety knowledge of aerial work.
When the purchased crane is shipped from the factory, it must pass the safety technical inspection of the local municipal quality and technical supervision department and obtain the "Crane Safety Technical Supervision Verification" and send it randomly.
The installation unit of the lifting machinery must obtain the qualification certificate. The installation personnel must have the operation certificate and the employment certificate to be able to install the lifting equipment and submit it to the superior safety and equipment authority for review and filing.
Before the crane is put into trial operation, the installation unit must first self-check and fill in the self-inspection report, and submit it to the receiving unit for pre-acceptance and acceptance (should have a complete record), which shall be tested and accepted by the superior supervisor, equipment department, and then approved. Test run.
The formal acceptance must be carried out in accordance with the requirements of the technical, safety and equipment departments of the superiors and the “three simultaneous†management standards for labor protection.
Strengthen the management of cranes. Seriously implement various management systems and safety inspection systems for cranes, do regular inspection, maintenance and maintenance of cranes, eliminate hidden dangers in time, and keep cranes in good working condition.
Strengthen the education and training of crane operators, strictly enforce safety operation procedures, improve operational technology capabilities and the ability to handle emergencies.
Concerned about surprises
Tag: Single beam suspension crane: purchase and aerial work safety knowledge
Previous: What is the application of screw pump in sewage treatment? Next: The scope and application of semiconductor materials
U/V/ G Ground Screw :
Abnormal Shape Ground Screw including many kinds of designs ,which are not same as standard design of Ground Screw with nut or flange ,usually add some special assist parts ,or special design of ground screw .
Materlal of Hot Dip Galvanized Ground Screw :Q235 carbon steel
Diameter of pipe : 48 mm,60 mm,68 mm,76 mm,89 mm,114 mm
Length of ground screw : 550-6000 mm
Thickness of pile : 2.50-4.0 mm
Surface treatment : Hot dip galvanized,DIN EN ISO 1461-1999,thickness of coating :more than 80micron
Mainly including : no pipe-ground screw, field ground screw ,no-pipe ground screw with nut ,Flange Ground Screw double flange pile ,twist pile ground screw, Ground Anchor screw,screw pole,galvanizing ground screw
Usage : Farm or garden fence,tent,solar energy system ,PV Mounting ,advertising board or banner ,simple house &
U Ground Screw,V Ground Screw,G Ground Screw
U Ground Screw,V Ground Screw,G Ground Screw,Flange Nut Ground Screw,Krinner Ground Screw
BAODING JIMAOTONG IMPORT AND EXPORT CO., LTD , https://www.chinagroundscrew.com