The most basic requirement for the installation of the luminaire is that it must be strong. There are at least 4 or more lamps in the living room, kitchen lamps, bedroom lamps, etc. How to install the lamps in the home decoration is to be detailed, because it should be used for a long time and can not be easily damaged, otherwise it will affect the family life.
Screw cap
1. The wiring should be connected to the terminal of the center contact, and the neutral wire should be connected to the threaded terminal.
2. The insulation of the lamp cap should not be damaged or leaked.
3. For lamp caps with switches, the switch handles should not have exposed metal parts.
For ceiling lamps equipped with incandescent bulbs, the bulb should not be in close contact with the lampshade; when the distance between the bulb and the insulating table is less than 5 mm, insulation should be taken between the bulb and the insulating table.
Metal halide lamp
1. The installation height of the lamp should be more than 5 meters. The wire should be connected to the lamp through the terminal and not near the surface of the lamp.
2. The lamp must be used with the trigger and the current limiter.
3. Protective measures should be taken for reflective lighting fixtures installed on the floor.
Flower light
For the hook of the fixed lamp, the diameter of the plan cylinder should not be less than the diameter of the hanging hook of the lamp, and must not be less than 6 mm. For large-scale lanterns, the fixing and suspending devices of the hanging lanterns shall be tested for loads of 1.25 times the weight of the lamps.
Glass covers for large luminaires installed in large locations should be designed to prevent splashing and splashing down as required by design.
Neon
1. The lamp should be intact and not damaged.
2. The lamp should be fixed by a special insulating bracket and must be secure*. The franchise bracket can be made of glass tube. The minimum distance between the fixed lamp and the surface of the building or structure should not be less than 20 mm.
3, the length of the lamp provided by the neon-specific transformer should not exceed the allowable load sore.
4. The installation position of the neon franchise transformer should be concealed and easy to overhaul, but it should not be installed in the ceiling, and should not be touched by non-inspectors. When it is installed, its height should not be less than 3 meters; when it is less than 3 meters, protective measures should be taken; when installing outdoors, waterproof measures should be taken.
5. The connecting line between the secondary conductor and the lamp of the neon-specific transformer shall be a high-voltage nylon insulated wire rated not lower than 15 volts.
6. The distance between the secondary conductor of the neon franchise and the surface of the building and structure shall not be less than 20 mm.
Edit this paragraph LED lighting future design theory
With the advent of LEDs, lighting design theory is constantly evolving with the advantages of LEDs.
1. Scenario lighting: It is a scene lighting proposed by Philips in 2008 to design lamps with environmental requirements. The scene lighting is based on the location, aiming to create a beautiful and beautiful lighting environment to enhance the scene effect and make people feel the scene atmosphere.
2. Emotional lighting: It is the mood lighting proposed by Kaisio in 2009, and the lighting is designed according to people's needs. Emotional lighting is based on human emotions, creating a mood-like lighting environment from a human perspective. Emotional lighting consists of four aspects: one is environmental protection and energy conservation, the other is health, the third is intelligent, and the fourth is humanization.
"Emotional Lighting Book" is China's first book to lead the trend of LED lighting design, breaking the situation that design theory has long been monopolized by foreign giants, making LED application easier for the market. Contribute to the latest mood lighting design concepts to share with you, and hope that more experts, scholars and designers will participate in the discussion and propose the meaning.
Safety Shoes,Work Boot,Work Shoes
Color Coated Steel Coil Co., Ltd , http://www.nssteel-coil.com