Everyone knows that decoration is a costly and strenuous job. The owners are struggling to go between the home store and the construction site. The dream of a good home improvement is always a tight budget. As a result, the “money-saving divine person†of the owner frequently appeared, calculating the decoration fee, filling his own small-time work, and so on.
Three male Aurora    House home flagship store
Calculating school
1, demolition fees do not spend
The owner saw the decoration company's quotation and took cold sweats. Even if the two-bedroom second-hand housing, light demolition, clean shipping costs a few thousand dollars. However, as a saver of money, the owner decided to dismantle the use of uncle Wang who collected waste products downstairs. You can't use the free help with the demolition, useful to give some money. In this way, mutual benefits can be earned without spending money.
Comments: The second-hand housing renovation, demolition, clear shipping really a lot. If the floor, floor tiles, etc. are completely dismantled, it is normal for a two-bedroom house to spend five or six thousand yuan. Indeed, in order to save money, some owners have to recycle the waste to dismantle it. However, this has caused many problems. First of all, before the decoration company's workers do the demolition work, they must first ensure that the indoor water, electricity, and gas main gates are all closed, so as to avoid accidents during demolition. In addition, the old house demolition project also needs to pay attention to the pipeline and the use of part of the protection, so as not to cause further obstacles and waste of construction. However, people who recycle waste products generally only consider which of the things they have removed can exchange money. At the same time, they resort to barbaric construction. They may leak the floor heating pipeline, destroy the door frame or even the wall when the wooden door is removed, or remove the electric wires that do not need to be replaced. The toilet was blocked and the water was not informed.
It is suggested that those who seek waste recycling should be dismantled. They may take up remedial expenses and assume security risks in the future. The landlord should carefully weigh it.
2, not looking for beauty but seeking to save money
Part of the home renovation, the washing machine is not safe, want to put in the kitchen. But how do you make cabinets for washing machines? It is obviously too expensive to find a factory for remodeling, and people who simply look for waste recycling will cut the small part of the cabinet that is normally utilized at the door edge. This will not affect the use of other parts, but also the washing machine into the kitchen.
Comments: If the customer chooses a brand cabinet, they can consult a professional and perform partial demolition and reinforcement repair without changing the structural strength of the existing cabinet. Do not change the structure of the cabinet cabinet without authorization, otherwise it will reduce the structural strength and service life of the whole cabinet. Especially the countertops, because of the lack of local support of the cabinets, the lighter ones are deformed and the heavy ones are scrapped. It will cost more to repair it again.
3, slotted wiring on the plate
When laying solid wood flooring ten years ago in the home, a large core board was placed on the keel. Now that the decoration is to re-arrange the wires, the owner thinks that the slotting on the wall looks like an expensive point. Why not slot the track directly on the original large core board, and the floor is not visible.
Expert Comments: Although it seems that today, solid wood floor keel and then spread the core board is a fantastic thing, ten years ago, there is such a construction, and this method is particularly practical foot floor.
As for the idea of ​​owners walking on large core boards, experts agree. "There is nothing wrong with it." However, fire protection paint must first be applied to the large core board, and the cable must be protected by a sleeve. In addition, they should be routed along the side of the wall so that they can be easily repaired at a later date, and the slot should not be opened too wide.
Activists
1. Self-refined waterways are not asking for help
The bathroom of the owner’s home was old and wondered about the renovation, replacing the wash basin and the toilet with a reasonable position. However, as soon as they looked around, the money for the brand company’s bureau was not much cheaper than the overall renovation.
It was better to ask for help than to ask for help. So the owner himself studied the waterway, drew up the sketches, planed the ground, and laid out the wiring, and found a buddy to fight together for half a month. Now that the bathroom looks like a model, there is no leakage.
Comments: Cloth waterway technology is relatively easy to operate, wiring layout is generally not too much of a problem. However, the current PPR water pipes used for water conversion must use hot-melt technology when bonding, and the pipes of the two pipes should be softened after heating and bonding. If the technology is not skilled, making the docking askew or air bubbles in the joint may cause water seepage in the future. Therefore, many home furnishing companies are now arranging modified water pipes in the ceilings of toilets so that they can be easily overhauled. The owner buried the pipeline under the ground or under the wall and it would be troublesome to overhaul it.
In addition, whether the owner’s bathroom is waterproof or not is worrying. Experts said that the toilet installation of the toilet's water outlet, floor drain, etc. is best not to move, the new water pipe and the original structure of the pipeline junction is easy to leak. It is recommended that the owners look for a professional team to transform the bathroom. Once there is a problem such as water leakage, the warranty service can be obtained.
2, it is not difficult to change the wire
The renovation team circuit transformation, quoted on the million. The owner thinks that he is a graduate of engineering and there is no problem with a circuit. So, bought some tools, slotted their own wiring. After several reworks, finally get it. Although people are tired, they do not spend much money. Tools can be used in the future and are very cost-effective.
Comments: Although money is important, life safety is more important. This kind of practice that the owner disregards personal and family life safety must be firmly opposed. According to the national regulations, the circuit reform and other related work should have a professional qualification certificate before being able to work. There are serious safety hazards in transforming circuits by themselves. If the owners do not operate properly, they will first damage their own safety. If the owners purchase their own wires and other products that are fake or inferior, it is very likely to cause electric leakage and other accidents, especially in wet areas such as bathrooms and kitchens. The consequences of leakage may be disastrous.
In addition, due to the lack of professional knowledge, the laying of the circuit is likely to cause problems such as circuit dummy, short circuit, and tripping. If you do not consider the use of water heaters, air conditioning, high-power electrical appliances, the circuit can't load these appliances only if you use 2.5 mm2 wire diameter.
Saving Decoration è¯€çª è¯€çª è¯€çª çŽ„ 玄 玄 玄 玄 玄 玄 玄 玄 玄 玄 玄 好 好 好 好 好 好 好 好 好 好 好 好 好 好 åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿ åœ°æ¿Home Furnishing
Ceiling Expansion Joint,Roof Expansion Joint,Floor Expansion Joint
Flooring Accessories,Stair Parts Co., Ltd. , http://www.chaluminumprofile.com