First, prevent electric shock
1. Never touch any electrical components inside the control cabinet or console when the machine is powered on or in operation. This can lead to serious electric shocks.
2. Avoid operating switches or knobs with wet hands to reduce the risk of electric shock.
3. Do not energize the system or replace electrical parts without proper authorization and training. This could result in electric shock or injury.
4. Only qualified personnel should perform maintenance. Repairs must be carried out strictly according to the manufacturer’s electrical safety guidelines to avoid accidents.
Second, prevent fire
1. Cutting machines often use flammable gases like acetylene, propane, or liquefied gas. Regularly inspect the entire gas line for leaks and ensure all connections are secure.
2. Keep the gas source away from open flames. Place a COâ‚‚ extinguisher or other suitable fire suppression equipment nearby for quick access.
3. When adjusting the flame, always monitor it carefully to prevent uncontrolled fires.
Third, prevent damage
1. While the cutting machine is running, make sure no people or objects are in the path of the cutting torch to avoid collisions.
2. After each cut, raise the torch to a safe height to prevent it from touching the metal plate and getting damaged.
3. Maintenance staff must ensure the machine is completely shut down before working on it. Hang warning signs to prevent accidental start-up and protect workers.
4. Avoid touching heat sinks or other hot components during prolonged operation to prevent burns.
Fourth, operational precautions
1. Before starting the machine, check all pipes for leaks. If any are found, do not start the machine until the issue is resolved.
2. Inspect the work area and guide rails for obstructions after starting the machine. Remove any obstacles before proceeding.
3. Operators must stay at their posts and not leave without permission. Unauthorized personnel must not operate the machine.
4. In case of an emergency, press the red emergency stop button immediately to halt the machine and prevent accidents.
5. Always follow the instructions of trained technicians during maintenance to ensure safety and efficiency.
6. Before shutting down, close all air valves and release any remaining pressure in the system.
7. If you notice any discoloration or overheating in the piping, power off the machine immediately and notify a supervisor.
By following these safety measures, operators can significantly reduce the risk of accidents and ensure a safer working environment. Always prioritize safety and maintain awareness while operating the CNC cutting machine.
AI Splice Tape
AI Splice Tape Advantages: selection of high viscosity Tape positive and negative after precision die-cutting processing:
When used, the fingers will never touch the plastic surface to ensure the reliability of the material.
Applicable to the vertical AI plug-in machine parts Splice, such as the shaft of the resistance of the radiating material parts and components.
AI-03M
AI Splice Tape with three holes Spec.: 40mm * 22mm 2000pcs/box For Radial carrier tape
AI-05M
AI Splice Tape with five holes Spec.: 70mm * 23mm 1000pcs /box For Radial carrier tape
AI-02M
AI Double Splice Tape Spec.: 28mm * 36mm 2000pcs /box For Radial carrier tape
AI-06M
AI Splice Tape with five holes Spec.: 40mm * 36mm 1000pcs /box For Radial carrier tape
AI Splice Tape,High Viscosity AI Splicing Tape,AI Splice Clip Tape,AI Splice Tape Roll
ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com