Z-8*15-1m1 Size Rubber Hose for Fuel Line

Model NO.: Z-8*15-1M1
Min B.P: 2.4MPa
W.T: 0.227
Trademark: ORLETE
Specification: customized
Origin: Nanjing, China
rubber hose for fuel line
 

Vacuum Hose

Brief introduction of vacuum hose applied to auto brake system

 
Application Environment Sun, rain, snow, fog, wind, sand, dust erosion, salt spray, acid rain, dust
Construction
 
Application Auto brake system, applied to connect vacuum booster and engine
Applicable Medium Air
Connection Adopt clamp for convenient assembly & disassembly
Accreditation Standards GB16897-2010,NES D8601,JIS D2607-1999,Q/HMAC 103.143-208-2013
 
 
Technical parameters
Accreditation Standards TYPE Size (I.D) (O.D) Max W.P Min B.P W.T
Min Max Min Max
(mm) mm mm mm mm Mpa Mpa Kg/m
GB16897-2010 8.7*17.5 8.7 8.43 9.23 16.8 17.7 -0.1 2.4 0.227
9*17 9 8.7 9.3 16.5 17.5 -0.1 2.4 0.227
9*17.5 9 8.7 9.3 16.8 17.7 -0.1 2.4 0.227
NES D8601 8.7*17.5 8.7 8.5 9.4 16.8 18.1 -0.1 2.4 0.227
JIS D2607-1999 9*17.5 9 8.7 9.3 17 18 -0.1 2.4 0.227
Q/HMAC 103.143-208-20139 9*17.5 9 8.7 9.3 17 18 -0.1 2.4 0.227
 
 
Oil Inlet Hose
 
Brief introduction of auto clutch master cylinder oil inlet hose

 
Application Environment Sun, rain, snow, fog, wind, sand, dust erosion, salt spray, acid rain, dust
Construction
 
Application liquid storage pot connection hose, clutch master cylinder oil inlett hose
Applicable Medium brake fluid
Connection Adopt clamp for convenient assembly & disassembly
Accreditation Standards Dongfeng passenger cars, Dongfeng Liuzhou Automobile, Jiangling, Chery, JAC, Geely
 
 
Technical parameters
Accreditation Standards TYPE Size (I.D) (O.D) Max W.P Min B.P W.T
Min Max Min Max
(mm) mm mm mm mm Mpa Mpa Kg/m
GB16897-2010 7.2*15 7.2 6.90 7.50 14.6 15.4 0.3 1.2 0.177
7.5*15 7.5 7.20 7.80 14.6 15.4 0.3 1.2 0.172
8*14 8 7.80 8.20 13.7 14.3 0.3 1.2 0.135
8*15 8 7.70 8.30 14.6 15.4 0.3 1.2 0.164
8.5*16 8.5 8.20 8.80 15.6 16.4 0.3 1.2 0.188
9*15 9 8.80 9.20 14.6 15.4 0.3 1.2 0.147
9*17 9 8.70 9.30 16.6 17.4 0.3 1.2 0.212
 
 
Water Hose
 
Brief introduction of water hose

 
Application Environment Sun, rain, snow, fog, wind, sand, dust erosion, salt spray, acid rain, dust
Construction
 
Application cooling system, air conditioner heating system connection
Applicable Medium cooling liquid
Connection adopt clamp for convenient assembly & disassembly
Accreditation Standards QHMAC 102.215-202-2012,QJQ 1309-2014,HG/T 2491
 
Technical parameters
 
TYPE Size (I.D) (O.D) Max W.P Min B.P W.T
Min Max Min Max
(mm) mm mm mm mm Mpa Mpa Kg/m
13*21 13 12.50 13.00 20.5 21.5 0.2 1.2 0.278
16*24 16 15.50 16.00 23.5 24.5 0.2 1.2 0.327
28*36 28 27.00 28.00 35.5 36.5 0.2 1.2 0.523
34*42 34 33.00 34.00 41.5 42.5 0.2 1.2 0.621
 

 
Packaging:
    * Generally: PVC bag in carton box with ORLETE logo
    * Can be customized based on your requirements

Lead time:
    * Fitting: common fitting within 30 days; special fitting within 40 days.
    * Brake hose: within 20 days.
    * Brake hose assembly: within 40 days.

Please noted: exact lead time is based on the order details.

Shipping:
    * About 30 minutes from our factory to Longtan port (Nanjing port)
    * Nanjing Lukou Airport is only about 40 minutes away
    * conveniently by air or by ocean
Z-8*15-1m1 Size Rubber Hose for Fuel Line

Why Choose Us?
Established in 1949, with over 65 years history
China's leading manufacturer of auto brake hoses & assemblies
550 employees with bachelor, master and doctoral degree
With over 60 patents
With certifications of ISO9001, TS16949, CCC, CRCC, IRIS, SGS, etc
Our brake hoses are used on China leader's personal car
 
How to select rubber hose?
1. Internal working medium of rubber hose: compressed air, water, engine oil, speed changing box oil, steam, etc.
2. Working temperature: including working medium temperature, surronding environment temperature.
3. Working pressure: normal operating pressure, max working pressure; to decide pulsating pressure and pulsating frequency, etc.
4. Working environment: if there is bending of rubber hose? What's the bending degree? If there is friction with car body?
5. Special requirements: including insulating property, electrical conductivity, flame retardant property, color appearance, etc
 
We Also Produce:
Automobile Category:
    Auto brake hose & assembly
    Air conditioner hose & assembly
    Power steering hose & assembly
    Oil & water hose
    Rubber hose oil seal
    O-ring
 
       Railway Category:
    Brake hose assembly
    General air hose assembly
    Average hose assembly
    High-speed EMU rubber hose & assembly
    Urban vehicle brake hose assembly
    Railway bearing oil seal
    Rail vehicle elastic side bearing
    Axial rubber gasket
 
       Other Products:
    Gas rubber hose
    Engineering hose & assembly
    Other rubber hoses
 
 
Brief Introduction of Us:
Nanjing Orientleader Technology Co., Ltd. (ORLETE) is originally known as Nanjing 7425 Rubber & Plastic Co., Ltd., founded in April 1949 with Mr Ju Jianhong as the legal representative while controlled by China National Chemical Corporation. Our company located at No.7 Maigaoqiao Pioneer Park, Qixia District, Nanjing, China.
 
As a digital enterprise specialized in rubber products R&D as well as high-end products manufacturing, so far we're China largest R&D and production base of auto brake hose, and also the designated R&D center of railway rubber products for China Railway Corporation. "ORLETE" and "7425" brand have a considerable reputation and credibility with exports to America, Japan and Southeast Asia, etc.
 
 
Our Workshop:
Z-8*15-1m1 Size Rubber Hose for Fuel Line



FAQ:
Q1: What kind of rubber hose that you produce?
 A:
Rubber brake hose
EPDM brake hose
Hydraulic brake hose
Hydraulic hose
Water hose
Fuel& oil hose
Brake hose
Stem hose
SAE J1401 brake hose
DOT 1/8" brake hose
OE No. brake hose
Flexible brake hose
Performance competition brake hose...
 
Q2:  What size of brake hose can you supply?
  A:  Common size: 3.2x10.5mm (1/8"); 4.8x12.5mm (3/16")
       Special size: 3.2x11mm...or your request size

Q3:  Can you print the words (line) according to our requirements?
  A:  Yes, we can provide embossed and printing mark with different colors based on your requirements.

Q4:  What kinds of fittings can you produce?
  A:  Various kinds. Female fitting, male fitting, banjo fitting, adepter brake hose fitting, bolts and nuts, steel with zinc , chrome, nickel...stainless steel, brass...

Q5:  How many types of brake hose do you produce?
  A:  Brake hose, Teflon braided brake hose, PTFE stainless steel braided brake line, Steel tube, Bundy tube, Steel tube assembly, Brake hose assembly...

Q6:  What is my order's delivery date?
   A: It usually takes 5-40 days, which depends on the order quantity.
 
Thank you very much for your interest to our products
Your further inquiry will be highly appreciated
 

Silicon Manganese

Silicon Manganese,Manganese Silicon Cored Wire,Ferro Silicon Manganese,High Carbon Silicon Manganese

YINCHUAN BINHE ABRASIVES CO.,LTD. , http://www.nxbhzhang.com