Today, there are many wall decoration materials, common ones are: wallpaper, paint, diatom mud, etc., and diatom mud has more advantages than the previous two, is also a favorite wall decoration material. So what are the characteristics of the diatom mud background wall, how to construct the diatom mud wall? Let's take a look together with the editor!
What are the characteristics of the background wall of diatom mud
1. Diatom mud can absorb formaldehyde
The main feature of the background wall of diatom mud is its ability to adsorb formaldehyde and purify the air. Because diatom mud has a special structure, its pore structure can absorb formaldehyde in the air, making indoor air quality better.
2. You can move in after the diatom mud room is renovated
Walls decorated with diatom mud will not produce odor. Generally, you can move in after 2-3 days of decoration, so if you are eager to move into a new house, you can consider using diatom mud to decorate, which can save a lot of manpower, money and Material resources.
3. Long service life of diatom mud
Diatom mud is a kind of decoration material composed of inorganic materials, and its life span is more than 20 years. Therefore, if it is used as a background wall decoration, it is not easy to fade, and the decoration effect is good, thereby saving costs.
4. Diatom mud can balance indoor humidity and temperature
Diatom mud can also effectively adjust the indoor humidity, which can not be achieved by other decoration materials. When the room is wet, its micropores can absorb excess water, so it is also called a "breathable wall".
How to construct diatom mud wall
1. Grassroots requirements
1. Scrape the wall surface 2-3 times with water-resistant putty and dry for 12 hours to ensure that the diatom mud is not foamed.
2. The surface of the base should be flat and clean, and the unevenness should not be less than 4mm.
2. Construction environment
1. The air humidity should be less than 80%, and the moisture content of the base surface should be less than 10%.
2. During construction, the indoor temperature should be between 5-40 ℃, and construction in direct sunlight should be avoided in summer.
3. The diatom mud construction site should pay attention to ventilation to ensure the drying time of the construction wall.
3. Construction tools
Ordinary scraping batch ash knife, straight edge wooden trowel, special right angle trowel, special sharp angle trowel.
On-site mixing method
1. Stirring tools: electric stirrer, 18-liter standard metal paint bucket.
2. Proportion of water: 1: 0.7.
3. Pour 90% clean water into the container first, then pour the diatom mud material, and use the remaining water to adjust when stirring.
4. Then it needs to be fully stirred. After stirring, let stand for 15 minutes, and stir again before construction.
4. Construction points
1. The construction must be carried out on the flat water-resistant putty, which is divided into two constructions, and the white diatom mud substrate is used as the primer.
2. After drying, start construction the next day.
3. After the surface is dry, use a special right-angle trowel for leveling.
Editor's summary: The above is about what are the characteristics of the diatom mud background wall, how to construct the diatom mud wall, I hope to help everyone! In short, the background wall of diatom mud is very good, and it has advantages over other materials. If you need it, you can understand it.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Diatom mud background wall
The thermostat is used to adjust the room temperature, according to the pre-set procedures to automatically adjust the room temperature; make room comfortable temperature.
Function:
1. Supports the cooling, heating or ventilating equipments of 2-pipe or 4-pipe and three-speed fan.
2. Detect and display the environmental temperature.
3. Cooling/heating/ventilating mode for your selection.
4. Manual(3 speed) / automatic blowing rate for your selection.
5. Power off memory function.
6. Low temperature protection function.
7. Ultra-low power design, be suitable for universal power supply.
Thermostat And Air Conditioning Control
Air Conditioning Thermostat Control,Air-Conditioning Room Control,Hotel Guest Room Thermostat,Electronic Thermostat For Hotel
Shenzhen Zhuohao Intelligent Electronic Development Co., Ltd. , https://www.szactop-smart.com