Wall Planer Machine 1200W Planing Width 5mm-55mm

      It is a new type water and electricity installment automatic grooving machine with fast speed and one time forming,also it's an ideal grooving tool to change open wire to concealed wire for old house,decorate new house and telephone wires.
New design advantages:
1,Able to open blind corner,never card knife
2,Bearing is updated to NSK fine steel.
3,Import IC never burn machine, easy to cut all kinds material
4,Made in China butter change to import butter,improve gear damage condition
Main features and properties:
1. Wide application: applicable to walls of different materials, such as solid brick, sand brick, hollow brick, air-added brick, cement-covered wall and wall column;
2. Easy for operation: it is simple to operate it. One can operate it easily; it is convenient to move it; during break in the midway, it is only necessary to turn off the power; it is unnecessary to dismantle the body which can still be suspended on the wall safely, without falling. It saves labor.
3. One-time shaping: fast and automatic grooving can shape in one time, without the need of any auxiliary tool and secondary process; the grooving depth can be controlled at will.
4. Rotate freely: it can be adjusted from different angles; the shape is beautiful; rotating grooving is available for 45°, 180° and 360°. It can be applied freely.
5. High efficiency: grooving is completed in one step; compared with traditional grooving mode, the efficiency ratio is 50:1; it greatly reduces construction cost such as manpower and time.
6. Wear-resisting tool: hard high-alloy tool bit can be used for more than 40 times; the cutting cost is only 1-3 cents/m; it is simple to dismantle it.
7. Healthy and environmentally-friendly: the dust cut by the main machine is particle-shaped; it will raise dust at a slow-speed of revolution. During grooving, the dust is little, which reduces pollution. Besides, it is equipped with auxiliary machine of industrial dust remover to remove noise and decrease hard to constructors caused by dust to the largest extent. It fully shows humanistic concern.
8. Easy to use: the structure is simple and practical. It can be dismantled, polished and repaired by non-professional personnel.
9. Eye protectors and auxiliary tools are equipped with the machine. The whole machine can be easily carried by a motorcycle.
10. Anti-locking press button is suitable for body mechanics structure.
11. Depth adjustment guide pulley can adjust the depth at will.

parameter:

Purchase mode:
1.Main machine: CGKC series 
2,Auxiliary machine: thickened stainless-steel barrel(30l) dust collector, water supply tank set
3,Accessories:106mm blade one box, 127mm blade one box,dedicated single-end tool for light brick, double-end tool

Our company in dry powder, mortar, putty powder, really stone paint, insulation mortar, coating and other complete sets of engineering equipment design, installation and debugging, provide reasonable solution, and focused on the investment scale of each customer, plant conditions, material type, logistics transportation condition, and different conditions and requirements, such as product formula, design a set of perfect and suitable for user's complete sets of equipment production line.
More question, please contact me by following ways in time.
Sales Manager : Betty Chen
 
Tel: +86-371-56053450  Fax:  +86-371-86253575
Mobile(WhatsApp,viber): +86 18135773702
 
Website: http://www.shotcretemanufacturer.com       It is a new type water and electricity installment automatic grooving machine with fast speed and one time forming,also it's an ideal grooving tool to change open wire to concealed wire for old house,decorate new house and telephone wires.
New design advantages:
1,Able to open blind corner,never card knife
2,Bearing is updated to NSK fine steel.
3,Import IC never burn machine, easy to cut all kinds material
4,Made in China butter change to import butter,improve gear damage condition
Main features and properties:
1. Wide application: applicable to walls of different materials, such as solid brick, sand brick, hollow brick, air-added brick, cement-covered wall and wall column;
2. Easy for operation: it is simple to operate it. One can operate it easily; it is convenient to move it; during break in the midway, it is only necessary to turn off the power; it is unnecessary to dismantle the body which can still be suspended on the wall safely, without falling. It saves labor.
3. One-time shaping: fast and automatic grooving can shape in one time, without the need of any auxiliary tool and secondary process; the grooving depth can be controlled at will.
4. Rotate freely: it can be adjusted from different angles; the shape is beautiful; rotating grooving is available for 45°, 180° and 360°. It can be applied freely.
5. High efficiency: grooving is completed in one step; compared with traditional grooving mode, the efficiency ratio is 50:1; it greatly reduces construction cost such as manpower and time.
6. Wear-resisting tool: hard high-alloy tool bit can be used for more than 40 times; the cutting cost is only 1-3 cents/m; it is simple to dismantle it.
7. Healthy and environmentally-friendly: the dust cut by the main machine is particle-shaped; it will raise dust at a slow-speed of revolution. During grooving, the dust is little, which reduces pollution. Besides, it is equipped with auxiliary machine of industrial dust remover to remove noise and decrease hard to constructors caused by dust to the largest extent. It fully shows humanistic concern.
8. Easy to use: the structure is simple and practical. It can be dismantled, polished and repaired by non-professional personnel.
9. Eye protectors and auxiliary tools are equipped with the machine. The whole machine can be easily carried by a motorcycle.
10. Anti-locking press button is suitable for body mechanics structure.
11. Depth adjustment guide pulley can adjust the depth at will.

parameter:

Purchase mode:
1.Main machine: CGKC series 
2,Auxiliary machine: thickened stainless-steel barrel(30l) dust collector, water supply tank set
3,Accessories:106mm blade one box, 127mm blade one box,dedicated single-end tool for light brick, double-end tool

Our company in dry powder, mortar, putty powder, really stone paint, insulation mortar, coating and other complete sets of engineering equipment design, installation and debugging, provide reasonable solution, and focused on the investment scale of each customer, plant conditions, material type, logistics transportation condition, and different conditions and requirements, such as product formula, design a set of perfect and suitable for user's complete sets of equipment production line.
More question, please contact me by following ways in time.
Sales Manager : Betty Chen
 
Tel: +86-371-56053450  Fax:  +86-371-86253575
Mobile(WhatsApp,viber): +86 18135773702
 
Website: http://www.shotcretemanufacturer.com

Polypropyl carbonate is soluble in polar solvents such as ketones, ethyl acetate, dichloromethanes and chlorohydrocarbons, and insoluble in alcohols, water and aliphatic hydrocarbons. It also forms a stable emulsion in the water. PPC allows gases like oxygen to diffuse through it. The glass temperature (Tg) is between 25 and 45℃, and PPC adhesives are amorphous. The glass temperature of PPC is slightly higher than that of polyethyl carbonate (PEC).

Poly Propylene Carbonate PPC

Poly Propylene Carbonate Ppc,100% Recycled Ppc,Bio-Based Ceramic Binder Ppc,Electroceramics Application Ppc

Xingbang High Molecular Materials Co., Ltd. , https://www.chemicaladditive.com