Many people will find that after the home tile is finished, there will always be this problem, such as: cracks in tiles, falling tiles or empty tiles, these problems are common in construction. Some owners will have this question:? Grouting tiles hollowing feasible approach it, let us take this question, explore together today under the brick hollowing grouting treatment method feasible?
What is the phenomenon of empty tiles?
After the tiles have been laid, we can use a small hammer to gently tap on the surface of the tile to hear its sound. If you hear a squeaky sound, it means that the floor tile in the position has been empty, and the follow-up may cause it to fall off. There is a certain security risk. 
What is the reason for the emptying of the floor tiles?
(1) The base of the wall or the back of the floor tile is not treated cleanly, and there are stains or dust inclusions.
(2) Insufficient water in the floor tiles.
(3) The quality of the cement mortar is not up to standard, or the ratio is improperly allocated, or the construction adhesive is not true. 
Is it feasible to grout grout treatment for floor tiles?
There are many reasons for the emptying of the floor tiles, but it does not mean that as long as the floor tile hollow drum grouting processing method is feasible. Floor tile hollow grouting treatment method, it is only for the empty corner of the floor tile to take this method, it is effective. In general, the method of empty drum grouting for floor tiles is feasible, but only if the corners are empty to do so.
Floor tile hollow solution
(1) Empty corners. We can directly adopt the filling and emptying method.
(2) Local hollowing. In general, if there is only a partial empty drum, but does not affect the installation or use of furniture appliances, we can ignore it. However, if it has an impact on the installation and daily life, it is recommended to knock out this part of the tile and reattach it.
(3) Hollowing over a large area. If this is the case, then it is better to re-do the base of the wall and then reattach the tiles.
(4) empty drum arch, fall off. If this is the case, then it is more serious, we can wait until the floor tile completely loose or even fall off, indicating that the cement mortar layer under the tile and the wall base layer (or the ground base layer) also have a loose "delamination", this time You can use a blade and other tools to remove the cement mortar layer and reapply the cement mortar to tile the tiles. However, it should be noted that if the tiles only partially fall off, do not use force to hit the mortar on the foundation surface to prevent the tiles from vibrating and loosening around the original strong tiles. 
How to reduce the probability of empty tiles
(1) Workers should take good care of the amount of cement ash during construction and use uniform force when tapping.
(2) After the local bricks are plastered, we must avoid walking on them.
(3) We must at least allow the tile to retain a 1mm brick seam when paving.
(4) The tiles must be fully soaked before laying the tiles. 
Xiaobian's words: The above is the relevant knowledge of Xiao Bian and everyone to explain the method of floor grout grout processing , I hope you can give some reference! More related content, you can pay attention to Qi family information, follow-up will show more exciting Content!
Floor tile hollow grouting treatment method
Most mining operations have management plans and software systems for managing production, maintaining and servicing equipment, and providing safe mine operations. However, there is an evolution happening in industrial environments such as mining. Technology innovation is bringing things such as Machine Learning, Analytics, Artificial Intelligence, and the Industrial Internet of Things (IIOT) to these industries with the promise of higher production, lower operating costs, improved performance, optimized operations and more. In order to take advantage of this technology evolution, you need access to data. Data generated by your machines and equipment can provide useful business intelligence. For example, having the engine on a large dump truck tell you that it`s losing compression on a cylinder or that the engine might be trending towards a failure in some aspect. Giving the management and service teams time to prepare for down time rather than letting the machine force it on them.
Mining Division Control Switch
control measures of mining,mining reclamation act,surface mining control,grade control in mining
Jinzhou Jinshi Mining Equipment Technology Co., Ltd. , https://www.jsminingeqpt.com