GRAPHITE OXIDE
 SE2430(powder)/ SE2430W(wet cake)/ SE2430S(slurry)CHARACTERISTICS
(1)Be rich in oxygen-containing functional groups, such as hydroxyl group, carboxyl group and epoxy group.
(2)can be easily grafted or modified for in-situ polymerization or integration with polymeric composites, therefore endowing good electrical and thermal conductivity, as well as mechanical reinforcement to the matrices.
(3)Comparing to the powder, graphite oxide wet cake will be easier to be exfoliated into graphene oxide dispersion, and to form thin films.
(4)Comparing to the powder and wet cake, graphene oxide slurry presents a much higher content of single-layered flakes.
Â
APPLICATIONSUse for polymer composites, such as plastic, resin, rubber, glass fiber and carbon fiber composites and also for fire retarded materials.
SPECIFICATIONS
Â
Type |
Specifications |
||||||||||
Appearance |
Solid content(wt%) |
pH |
Tap density(g/cm3) |
Viscosity(mPa·S) |
Absorbance |
C(wt%) |
O/C |
SOÂ4 |
Cl(wt%) |
Metalion(ppm) |
|
SE2430 |
Brown powder |
--- |
1.8 |
<1.0 |
--- |
--- |
47±5 |
0.6±0.1 |
<8.0 |
<1.0 |
<100 |
SE2430W |
Brown paste |
45 ± 5 |
≥1.2 |
--- |
≥2000 |
≥45 |
47±5 |
0.6±0.1 |
<8.0 |
<1.0 |
<100 |
SE2430S |
Brown solvent |
0~0.1 |
--- |
--- |
--- |
--- |
47±5 |
0.6±0.1 |
--- |
--- |
--- |
HANDLING AND STORAGE
Wear appropriate protective clothing and safety gloves to avoid direct contact with body. In case of contact, flush with a lot of water. Take appropriate ways to avoid dust. Keep ventilation and install dust collectors to avoid inhalation. Load and unload carefully to protect from damage.
Store in tightly-closed containers in a dry, cool and well-ventilated place, and stay away from ignition sources or heat. Stay away from strong reducing agent and combustibles. Make sure the packages are free of damage or leaks,  After opening the package, use product immediately. Partly used packages should be tightly sealed again. Product is moisture sensitive. If product picked up moisture, either due to damage of packaging or open storage,  dry product for several hours at 80°C to achieve moisture free status.
The shelf life of the product is 3 years if stored in original package intact.
TRANSPORT
According to the self-heating test results, when the substance is to be transported in packaging with volume not more than 3 m3, Hazard class: none, UN classification: none, packaging mark, none. When the substance is to be transported in packaging with volume more than 3 m3, Hazard class, 4.2, UN number 3088, packaging mark, self-heating substance, packing group: III. Shipping name: self-heating organic solid, not classified.
Â
Comment: The specifications of the product can be customer made as required
Â
First Grade Silicon Carbide,Silicon Carbide For Abrasive,Silicon Carbide For Refractories,Metallurgical Grade Black Silicon Carbide
ningxia hexing carbon based materials co.ltd , http://www.hexingsicmanufacture.com