Replenishment valve is a new type of valve installed on the water supply pipe of a closed cycle heating or cooling system. The automatic recharging valve automatically maintains the system pressure as a set value. The check valve in the valve prevents the heat of the heating system Water back to the cold water pipe, fill valve internal filter to prevent impurities flow into the system, even if the water pressure changes, but also to maintain the stability of the outlet pressure, emergency hand wheel can completely cut off the water flow. Replenishment valve is set valve, globe valve, check valve, filter function in one of the new high-tech valves. Mainly used in air conditioning systems and automatic replenishment of the boiler system. Automatic rehydration valve installation: generally installed in the municipal water and air conditioning systems or boiler systems, that is, from the water pipe connected to the water valve and then connected to the air conditioning or boiler system, so you can use the municipal water pressure to the air conditioning or Boiler replenishment. Automatic adjustment of the fill valve: fill valve when the water supply pressure uniform set to 1.5bar, if the required water pressure is not 1.5bar, you can reset the water pressure, the specific method is as follows: the fill valve downstream of the valve or valve closed , Loosen the lock nut on the fill valve, and then rotate the pressure adjustment screw, turn clockwise from above to see the outlet pressure increases, turn counterclockwise to reduce the outlet pressure, the specific readings can see the pressure gauge on the fill valve readings, Keep adjusting to the required pressure to stop, then tighten the locknut.
Wooden Door,Mdf Door,Solid Wood Door
Steel Door,Toilet doors,Wood Door Co., Ltd. , http://www.steeldoors-manufacuturer.com