Plain weave stainless steel wire mesh, is
one of the stainless steel woven mesh weaving method. Anping Huaxi wire mesh
can produce plain weave, twill weave, dutch weave and reverse weave stainless
steel wire mesh.
What is the characteristics of plain weave stainless steel wire mesh?
Anping Huaxi wire mesh`s plain weave stainless steel wire mesh has follows
characteristics :
Material:AISI304, AISI304L, AISI310, AISI310S, AISI316, AISI316L, AISI317 , refer
stainless steel alloy
Same warp and weft wire diameter
Density of warp and weft wire is the same.
Each wire is woven alternately over and under the warp wires through the cloth
at 90 degree angles, Square hole.
Anping Huaxi wire mesh production of plain weave stainless steel wire mesh,
easy to clean , precise, uniform, structural precision, high liquidity, strong
and durable.
Anping Huaxi wire mesh`s plain weave stainless steel wire mesh, widely used in
industry and construction sand screening , petrochemical , oil industry make
mud mesh, ink screen printing, chemical fiber industry screen filter , rubber,
metallurgy, medicine, food , environmental protection All minerals , coal ,
aerospace , paper , electronics, electroplating industry for acid washing their
nets , filters , etc. , can also be used to protect the mechanical attachment.
Plain weave stainless steel wire mesh specification detailed resolution:
For example P400-316L-0.025mm 1M * 30M
"P"means [Plain" or some chinese think it is Pingzhi,.
"400" means 400 mesh., "316 L" means material is stainless
steel AISI316 L, "0.025mm" is the thread section 0.07mm diameter .
"1M" width of mesh, "30M" length of roll
Anping Huaxi wire mesh can weave plain weave stainless steel wire mesh from
5meshx3.0mm to 400meshx0.025mm, details please click Stainless Steel Plain Wire
Mesh.
Additional our plain weave stainless steel wire mesh 180meshx0.053 to
400meshx0.025mm are mostly used for printing. Welcome to ask any question about
plain weave stainless steel wire mesh.