Ceiling lamp installation graphic ceiling how to install

In home decoration, many people like to install ceiling lamps, because the appearance of ceiling lamps is simple and beautiful, with strong plasticity. The installation effect of ceiling lamps will affect the effect of home improvement. Today Xiao Bian will introduce you to the installation of ceiling lamps . Let's take a look.

Ceiling light introduction:

The ceiling lamp is a kind of lamp, as the name suggests is because the lamp is flat at the top, the bottom is completely attached to the roof when installed, so it is called a ceiling lamp. Light sources include ordinary white light bulbs, fluorescent lights, high-intensity discharge lamps, tungsten halogen lamps, and LEDs.

Ceiling lamp installation diagram steps:

First, install the tool

To install ceiling lamps, we must first prepare the required installation tools, such as: impact drills, electrician's pliers, screwdrivers, insulating tape, a small piece of wood, a wooden ladder.

Second, choose a good location

The first thing to do when installing a ceiling light is to determine the position of the ceiling light. Straight incandescent lamps or fluorescent lamps should be installed toward the front of the cabinet. In this way, part of the light emitted by the lamp will hit the rear baffle, and then it will be reflected on the operating platform and then shot toward the center of the entire space.

Third, remove the ceiling lamp mask

Remove the ceiling lamp mask, remove the mask, and then remove the lamp tube. Under normal circumstances, the ceiling lamp mask has two fixed ways of rotation and snapping. When removing, please pay attention to prevent the installation. Shatter the lamp.

Fourth, install the base

First of all, let's insert the previously reserved wire into the wire hole of the base, use one hand to hold the base of the ceiling light and place it in the position to be installed, then use a screwdriver to screw one of the screws into the space, taking care not to twist it. It is too dead to check that the position is not accurate and move again, and the correct position is placed after the inspection.

Fifth, connecting wires

After the base is fixed, the power cord can be connected to the terminal block of the ceiling lamp. Note that the two ends connected to the ceiling lamp power cord should have good electrical contact, and they should be wrapped with black tape respectively. Keep a certain distance.

Sixth, install the mask pendant

After installing the masks and straps and connecting the wires, you can try the power on. If everything is normal, you can turn off the power supply and install the ceiling light mask.

Xiaobian conclusion: The installation diagram for ceiling lamps is introduced here and I hope to be helpful to everyone. If you have anything you don't understand, you can leave a message for Xiaobian below! We will answer your questions as soon as possible. This website will provide you with more complete, more detailed and updated information.

Ceiling light installation diagram

Bottle Labels

Bottle Stickers,Bottle Labels,Custom Bottle Labels,Personalised Bottle Labels

QD Cloudy Inernational Pre Ltd , https://www.qdcloudy.com